|
Product Details:
Payment & Shipping Terms:
|
| Type: | BW 3013-400 | Salt Rejection Rate: | 95% |
|---|---|---|---|
| Capacity: | 400GPD | Warranty: | 1 Years |
| Weight: | 0.5KG | Working Up: | 1000TDS |
| Recovery Rate: | 50% | Function: | Water Purification Plant |
| High Light: | Hi Flow Ro Purifier Membrane,Ro Purifier Membrane 400GPD,water purifier membrane |
||
Large Flow 3013-400 GPD Reverse Osmosis RO Membrane for Water Purifier
If you are using an RO water purifier at your home or office then you can simply store the wastewater in some tank or bucket and reuse it for washing your car. Water with a TDS level of 1200 – 1500 PPM can be safely used for car washing. If the TDS level of wastewater is high, you can mix tap water to dilute it.
You can put waste RO water to good use by using it to wash or clean your front or backyard. Taking a bath or exposing your hair to this rejected reject is a no-no. But you can certainly use it to flush your toilets and give your bathroom fixtures and faucet their periodical clean-up.
The product can be operated at a lower pressure
and is suitable for water sources with low salt content,
such as household water purifiers, hospital water, laboratory water and filtered well water.
The product specification
| Model Number | Description | 3013-400 |
| Performance & Test Condition |
The Desalination Rate % | 96% |
| Water Rate GDP | 400 | |
| The Test pressure | 100psi | |
| Test solution Temperature | 25± 1ºC | |
| Test Solution Concentration NaCl | 500ppm | |
| Test solution pH value | 6.5-7.5 | |
| Recovery Of Single-Branch Membrane Element | 50%±5 | |
| Feed water SDI | ≤5 |
Note:1. The Max. continous operation temperature is 35ºC when PH rate over 10.
2. In certain conditions,if would cause membrane breakage if the free chlorine or the other oxidant in feedwater.The production quality guarantee range is notincluded membrane breakage by oxiadation.
3013-400: A:13.0inch B:3.0inch C:0.68inch D:0.75inch E:10.0inch
RO membrane continues to increase in demand with the growth of the water treatment sector. However, fouling and scaling are its major drawbacks. Fouling occurs in both cellulose-based and thin-film composite membranes. So we have professional R&D and after sale service for our customers.
FAQ:
Contact Person: Mr. Robert Wang
Tel: 0086 134 2961 7413
